Blog

Why buy a Spring Manufactured Controller

Why buy a Spring (Europe) manufactured controller? Spring are an electronics company we design, test and build a wide range of electronics used in all sorts of applications. Travel through an Airport, Sea Port you will find our electronics there. Sports stadia, security applications access control ...

Posted on Monday, 14th December 2015 17:50 - Read more...

System Maintenance FUSE!!

No Fuse !! The Consequences !! I have written in the past about the importance of fitting the correctly rated fuse. That if a fuse blows it is doing its job and the cause must be found. Simply fitting a higher rated fuse or not fitting one at all, could mean you are literally playing with fire. Re ...

Posted on Friday, 18th December 2015 09:54 - Read more...

The importance of Fuses

Failure to fit the fuse and or reverse polarity may lead to damage to your controller Pump and or wiring which will invalidate the manufacturer's warranty on the control. Why is fitting a fuse important A fuse(s) is needed in any electrical system (AC or DC). These protection devices react to ...

Posted on Monday, 14th December 2015 17:23 - Read more...

Poles Apart

Am I referring to the vast range of poles available for window cleaning? in short no, discussing water fed poles, I will leave to those in the know to debate. I want to discuss polarity sensitive electrical devices, in particular, controllers. I will touch on the difference between AC and DC, In oth ...

Posted on Monday, 14th December 2015 17:39 - Read more...

Running a two man system from one battery

It is very common for a two pole system to be run off one battery. Points to bear in mind The Current draw will double Wiring looms should be of equal length The battery will require charging more frequently A higher rated battery may be required. We would suggest 120 AH at least It is poss ...

Posted on Thursday, 17th December 2015 13:52 - Read more...

Spring Digital Or Analogue

Spring have been producing pump controllers since 2005. We are an electronics company and have a deep understanding of how a WFP system works and then strive to provide easy to use controllers that offer a range of enhanced features and value to the user. As an electronics company, there is sound e ...

Posted on Monday, 14th December 2015 17:16 - Read more...

WFP Or Traditional methods a brief View

As a Supplier into the industry, I watch and read with interest the eternal debate between WFP and Trad users as to which method is best. Both, of course, have their place and many use a combination. Interestingly what we now refer to as Traditional cleaning has changed dramatically over the years. ...

Posted on Monday, 14th December 2015 17:07 - Read more...

Low Temperature and WFP systems

Effects of Low temperature on a System       For some low temperature may not be an issue Perhaps now is a good time to move to California or Florida Perhaps even Spain. In this article, I would like to explore the effect of low temperatures and changes in temperature on yo ...

Posted on Wednesday, 23rd December 2015 10:26 - Read more...

Heat Effects

Why Choose a SPRING Controller? Have you ever noticed that your cables, pumps and controllers can get very hot and wondered why? Heat is an enemy of electronics. As circuits are switched on and off components heat and cool and this cycle will over time damage components and make them less able to ...

Posted on Monday, 14th December 2015 17:04 - Read more...

Advanced Liquid Logic Controller with LCD Display

The WFP market continues to move toward general acceptance of electronic pump control. There is, of course, a wide range of controls from basic analogues that simply use PWM to adjust the pump speed through to more advanced units aimed at system control. As we move through the spectrum of controls ...

Posted on Monday, 14th December 2015 16:59 - Read more...