V11 HC Auto Fill / Flush 

The main features of the V11 HC Auto Fill Flush model include the following.

  • High powered 12v pump controller (35 Amps max) 
  • Suitable for softwashing pumps
  • Fills your tank automatically
  • One time fill or continuous (on demand) fill
  • Automatically flushes your RO membrane
  • Single or hourly flushing selectable
  • Easy to use and simple to install
  • Copes easily with demanding daily use
  • Extends life of resin cartridges
  • Controls water flow accurately (0-99) and dependably
  • Advanced micro Dead End detection and retesting
  • Accurate battery voltage testing
  • Low battery cut off override function
  • Unit is sealed to IP65, stopping water ingress
  • Supplied with full wiring kit, fuses and fuse holders, solenoid valve, level switch (horizontal or vertical), and full instructions.

This controller can be used as part of your RO process or to fill water tanks in your vehicle. Press a button to open the solenoid valve and start the water fill. When the water reaches the required level the level switch is activated and the controller closes the solenoid valve, thus stopping the fill. The controller also flushes your membrane automatically and can be set to do this at the beginning of each fill or hourly. The controller comes with all the market leading functionality of our standard digital controller.

Suitable for systems with or without booster pump fitted.