Available now from Gardiner and Grippa Systems

LIQUID LOGIC V3 For More information see

gardinerpolesystems/liquid-logic-v3

All New Liquid Logic™ V3 System Controller for Van systems

  • The World's most advanced Pump and complete 'WFP System' Controller
  • Ideal for advanced DIY system installers - control and monitor everything from just this one box
  • Controls a WFP delivery pump with digital precision
  • Controls fill facility on an in-vehicle RO system - Automatic RO shut-off when tank is full
  • Controls fill facility on an in-vehicle DI system - Automatic water inlet shut-off when tank is full
  • Monitors and displays twin TDS readings whilst processing water - 1/2" John Guest probes
  • Provides high configurable high TDS cutoff, alarm or warnings
  • Provides autoflushing of your RO to keep in tip top condition
  • Monitors filter life of carbon, sediment and RO filters
  • Provides hot water control of your heater plus frost protection
  • Monitors and displays output water temperature
  • Split charger relay for charging second battery
  • Battery voltage display

Comes complete with 1/2" (or 12mm) TDS probes (John Guest push-fit), solenoid valves, float switch, full wiring loom, connectors, fuse and illustrated instruction manual.

Note: We recommend that a pre-filter is fitted in line before the solenoid valve.

 

LIQUID LOGIC S3 For More information see

gardinerpolesystems/liquid-logic-s2

All New Liquid Logic™ S3 System Controller for Static systems

  • Ideal for advanced system installers ­ control and monitor everything from just this one box
  • Mulit­Line Text Display for accurate information and programming at a glance
  • Controls fill facility on a static RO system ­ Automatic RO shut­off when tank is full
  • Auto­Flush on a system RO system
  • Controls fill facility on a static RO & DI system ­ Automatic water inlet shut­off when tank is full
  • Flow Meter ­ shows water production rate and total water processed for accurate filter
  • replacement. Notification alerts for filter changes.
  • Water Pressure reading ­ shows input water pressure. Audible alarm notification if mains water is
  • disconnected, along with automatic shut down of booster system if mains is not reconnected.
  • Monitors and displays twin TDS readings whilst processing water ­ 1/2" John Guest probes
  • Audible alarm if TDS levels hit a preset level and require a filter or resin change

Comes complete with 1/2" TDS probes (John Guest push­fit), solenoid, float switch, full wiring loom, connectors, fuse and illustrated instruction manual.

 

Quick start guides:

S3_Liquid_Logic - Data Sheets

V3_Liquid_Logic - Data Sheets

S2_Liquid_Logic - Data Sheets

V2_Liquid_Logic - Data Sheets